Are you worried about the puddle of water you just found under your washing machine? Don’t worry. All you need to do is find out why your appliance has started to leak and do a simple job of replacing the part that may have caused the leak. In most cases, it will be a simple DIY solution, but you can always contact a professional if you don’t feel up to doing the repair yourself.
Please note that these solutions should only be applied if your washing machine warranty has expired. If the contract is still valid, contact the manufacturer’s technical service and make an appointment to repair the leak.
How to locate a washing machine leak
The first thing is to ensure that the water you find is not just a spill. To check if the washing machine is leaking, wipe off the water and rerun it with a normal wash cycle. When it’s done, check under and behind the washer for water. If another puddle has formed, it’s time for you to get down to business.
The washing machine door and the soap drawer
It is easy to detect if the washing machine door is the cause of the leak. If you see water dripping through the door during the wash cycle, the seal is probably dirty or damaged. Try cleaning it and if it continues to leak after that, replace the seal by purchasing it through the washing machine parts section of our website.
On the other hand, the leak can also be due to the detergent. Misuse or an incorrect quantity can alter the proper functioning of the appliance. Switch to the detergent recommended by your manufacturer in your washing machine manual and see if it continues to drip by running another wash cycle.
Another possible problem is that the incoming water pressure is too high. In this case, you will have to lower it at the connection point with the washing machine.
water supply hoses
If you put a to the back of the washing machine, you will find two hoses that connect to the wall. Make sure they aren’t ripped or cracked, and if they are, get a new steel-braided hose instead of a rubber one. The latter deteriorates faster.
If they aren’t ripped or cracked but the dripping is coming from the hoses, unscrew them from the wall and washer, replace the rubber washers and mesh filters, and retighten the connections at each end as you screw them back on. This will probably fix the problem.
If the exposed solutions have not solved the incident, it is most likely that the leak is due to damage to one of the internal components of the appliance. In this case, unless you are a handyman, we recommend contacting a technician.